P-8
Initialization
1. Machine Initialization
1-1. How to initialize the terminal
Preparation:
1. All peripheral devices and terminals of this cluster should be turned off.
2. Connect all of the peripheral devices (such as printer, display etc.) to terminal.
3. Connect all terminals by inline.
Operation:
4. Turn on all peripheral devices of a terminal.
5. Turn on this terminal with pressing the initialize switch and release after beep sound.
INIT
Copyright(C) 2008
CASIO COMPUTER CO.,LTD. C
All rights reserved.
ROM VER. xxxxxx xxxx
789
CREATE xxxx-xx-xx xx:xx
QT-6600 Version x.xx 456
APL VER. xxxxxx xxxx
123
0
OK
6. After releasing the key, enter “20000” (U.S.), “10000” (other area: English), “40000”
(other area: Germany), “50000” (other area: French), “60000” (other area: Spanish) and
press the <OK> key.
Init Sw
To Next Page
Loading...
Need help?
General
