Casio QT-6600 Programming Manual

P-87
QT-6600 Programming Manual
4-2-7 Programming clerk key ID
Operation: <PGM3> → 2.Clerk → 7.Clerk Key ID
——— i-Button key ID character / Clerk name (Arrangement No.)
• Add/Modify the record
→ Attach i-Button to the receiver → Select Clerk
or
→ Attach i-Button to the receiver → Enter arrangement file No. (3-digit) and
arrangement table No. (4-digit) and press <YES> key.
• Delete the record
→ Select record → Select (Key ID reset)
Clerk Key ID
1234567890AB
C 01
ABCDEFGHIJKL GLENN DEAL
4-2-8 Programming clerk pop-up window
You can program the attribution (characteristics) of clerk pop-up window.
Operation: <PGM3> → 2.Clerk → 8.Clerk Window
• Select Clerk window 1 ~ 9
——— Title of the clerk pop-up window 1
→ Select job
• Key Assign
This program defines a clerk to a key in the pop-up window. In case of deleting the
assignment, select (Clerk reset).
• Key Attribute
This program defines the key color, shape and picture of the key in the pop-up window.
• Key Delete
This program deletes the key in the pop-up window.
Clerk Window
Descriptor Clerk window1 0036-085
OK? YES

Casio QT-6600 Specifications

General

Brand	Casio
Model	QT-6600
Category	Touch terminals
Language	English