Cisco 7941G User Manual

Edit Line Text Label for Phone Display
Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2
Select a phone from the Name drop-down menu.
Step 3
Select Line Settings.
Step 4
If you have more than one directory number (line) assigned to your phone, select a line from the Line drop-down
menu.
Step 5
In the Line Text Label area, enter a text label.
Step 6
Select Save.
Phone and Access List setup for Mobile Connect
When using Cisco Mobile Connect, you must add your mobile and other phones that you want to use to place
and receive calls using the same directory numbers as your desk phone. These phones are called remote
destinations. You can also define access lists to restrict or allow calls from certain numbers to be sent to your
mobile phone.
Create Access List
Procedure
Step 1
Sign in to your User Options web page.
Step 2
Select User Options > Mobility Settings > Access Lists.
Step 3
Select Add New.
Step 4
Enter a name to identify the access list and a description (optional).
Step 5
Select whether the access list will allow or block specified calls.
Step 6
Select Save.
Step 7
Select Add Member to add phone numbers or filters to the list.
Step 8
Select an option from the Filter Mask drop-down list box. You can filter a directory number, calls with
restricted caller ID (Not Available), or calls with anonymous caller ID (Private).
Step 9
If you select a directory number from the Filter Mask drop-down list box, enter a phone number or filter in
the DN Mask field.
You can use the following wild cards to define a filter:
•
X (upper or lower case): Matches a single digit. For example, 408555123X matches any number between
4085551230 and 4085551239.
•
!: Matches any number of digits. For example, 408! matches any number starts with 408.
•
#: Used as a single digit for exact match.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
96
User Options Web Pages
Phone and Access List setup for Mobile Connect

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g