Cisco 7941G User Manual

Turn Off Mobile Connect from Mobile Phone
Procedure
Step 1
Dial your assigned Mobile Voice access number.
Step 2
Enter your mobile phone number (if requested) and PIN.
Step 3
Press 3 to disable Mobile Connect.
Step 4
Choose whether to turn Mobile Connect off for all configured phones or just one:
•
All phones: Enter 2.
•
One phone: Enter 1 and enter the number you want to remove as a remote destination, followed by
pound (#).
Turn On or Off Mobile Connect Access to All Remote Destinations from Desk Phone
Procedure
Step 1
Press Mobility to display the current remote destination status (Enabled or Disabled).
Step 2
Press Select to change the status.
Step 3
Press Exit.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
59
Calling Features
Business Calls Using Single Phone Number

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g