Cisco 7941G User Manual

Switch to Call Overview Mode
Procedure
Step 1
Press for the highlighted line.
The phone switches to call overview mode, displaying one call per line. The displayed call is either the active
call or the held call with the longest duration.
Step 2
To return to standard viewing mode, press and then immediately press the line button.
Switch Between Connected Calls on One Line
Procedure
Step 1
Highlight the call you want to switch to.
Step 2
Press Resume.
Any active call is placed on hold and the selected call resumes.
Switch Between Connected Calls on Different Lines
Procedure
Step 1
Press for the line that you are switching to.
If a single call is holding on the line, the call automatically resumes.
Step 2
If multiple calls are holding, highlight the appropriate call and press Resume.
Switch from Connected Call to Answer Ringing Call
Procedure
Perform one of the following actions:
•
Press Answer.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
30
Calling Features
Switch to Call Overview Mode

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g