What to do next
Change another setting to ensure that multiline phones correctly display the Do not disturb (currently, a steady,
green color) status for each selected or unselected line. See DND and Call Forwarding Status Sync, on page
227.
Users can enable or turn off the DND feature for each phone line if you configure star codes for DND. See
Configure Star Codes for DND, on page 160.
Related Topics
DND and Call Forwarding Status Sync, on page 227
Enable Feature Key Sync, on page 228
Enable DND Status Sync via XSI Service, on page 229
Enable Synchronization of Settings Between the Phone and the Server
Enable the synchronization of settings between the phone and the server.
This setting must be enabled for the following features and types of users:
• Call forward all
• DND
• Executives and assistants
You can enable this setting in the XML Configuration file as shown in the sample below.
<!-- Call Feature Settings -->
<Feature_Key_Sync_1_ ua="na">Yes</Feature_Key_Sync_1_>
Note
If a line key is configured with feature key sync and is also enabled with DND or call forward feature, the
respective DND icon or the call forward icon is displayed next to the line key label. If the line key has
a missed call, a voice message, or an urgent voicemail alert, the DND icon or the call forward icon is also
displayed with the alert notification.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Voice > Ext [n] (where [n] is the extension number).
Step 2 In the Call Feature Settings section, set the Feature Key Sync field to Yes.
Step 3 Click Submit All Changes.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
159
Cisco IP Phone Administration
Enable Synchronization of Settings Between the Phone and the Server
To Next Page
Loading...
Need help?
General
