Descriptiondirect_action
Initiates a reboot of the phone. Does not take any parameter with ?
Example
http://10.1.1.1/admin/reboot
reboot
Downloads a snapshot of the phone configuration in XML format. The passwords are hidden for security.
Most of the information here corresponds to the properties on the phone web page under Voice tab.
Example
http://10.1.1.1/admin/cfg.xml
cfg.xml
Downloads a snapshot of the phone status in XML format. Most of the information here corresponds to
the Status tab in the phone web page.
Example
http://10.1.1.1/admin/status.xml
status.xml
Downloads a screenshot of the phone LCD UI at the time when this action is initiated.
Example
http://10.1.1.1/admin/screendump.bmp
screendump.bmp
Downloads a set of archived logs stored on the phone.
Example
http://10.1.1.1/admin/log.tar
log.tar
Enable Access to Phone Web Interface
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Voice > System.
Step 2 Under the System Configuration section, choose Yes from the Enable Web Server drop-down list box.
Step 3 In the Enable Protocol drop-down list box, choose Http or Https.
Step 4 In the Web Server Port field, enter the port to access the web server. The default is port 80 for HTTP or port
443 for HTTPS.
Step 5 In the Enable Web Admin Access drop-down list box, you can enable or disable local access to the Admin
Login of the phone web user interface. Defaults to Yes (enabled).
Step 6 In the Admin Password field, enter a password if you want the system administrator to log in to the phone
web user interface with a password. The password prompt appears when an administrator clicks Admin Login.
The minimum password length can be 4 characters or the maximum password length is 127 characters.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
170
Cisco IP Phone Administration
Enable Access to Phone Web Interface
To Next Page
Loading...
Need help?
General
