Cisco 8841 Administration Guide

Procedure
Step 1 On the phone administration web page, go to Voice > System > Optional Network Configuration.
Step 2 Configure the Syslog Identifier parameter as described in Optional Network Configuration, on page 266.
Cisco IP Phone Status
The following sections describes how to view model information, status messages, and network statistics on
the Cisco IP Phone.
• Model Information: Displays hardware and software information about the phone.
• Status menu: Provides access to screens that display the status messages, network statistics, and statistics
for the current call.
You can use the information that displays on these screens to monitor the operation of a phone and to assist
with troubleshooting.
You can also obtain much of this information, and obtain other related information, remotely through the
phone web page.
Display the Phone Information Window
Procedure
Step 1 Press Applications .
Step 2 Select Status > Product Information.
When a user password is set, a corresponding icon (lock or certificate) displays at the top-right corner of the
phone screen.
Step 3 To exit the Model Information screen, press .
View the Phone Status
Procedure
Step 1 Press Applications .
Step 2 Select Status > Phone Status > Phone Status.
You can view the following information:
• Elapsed time—Total time elapsed since the last reboot of the system
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
242
Cisco IP Phone Troubleshooting
Cisco IP Phone Status

Cisco 8841 Specifications

General

Brand	Cisco
Model	8841
Category	IP Phone
Language	English