Cisco 8841 Administration Guide

Add Ignore Programmable Soft Key to Silence an Incoming Call
You can add the Ignore softkey on the phone. User can press this softkey to silence an incoming call when
busy and don't want to be disturbed. When the user presses the softkey, the phone stops ringing, but the user
gets a visual alert, and, can answer the phone call.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Voice > Phone.
Step 2 In the Programmable Softkeys section, set the Programmable Softkey Enable to Yes.
Step 3 Enter the following values in the Ringing Key List field:
answer|1;ignore|2;ignoresilent|3;
Step 4 Click Submit All Changes.
Enable BroadWorks Anywhere
You can configure a phone to allow a call to seamlessly be moved from one desk phone(location) to another
mobile phone or desk phone(location).
When you enable this feature, the Anywhere menu is added into the phone screen. The user can use this menu
to add multiple phones as locations to the extension. When there is an incoming call in that extension, all the
added phones will ring and the user can answer the incoming call from any location. The locations list also
gets saved to the BroadWorks XSI server.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Voice > Ext(n).
Step 2 In the XSI Line Service section, set the XSI Host Server, XSI Authentication Type, Login User ID, Login
Password, and Anywhere Enable field as described in the XSI Line Service, on page 330.
If you select SIP Credentials for XSI Authentication Type, you need to enter subsriber Auth ID and
Password in the Subscriber Information section.
Step 3 Click Submit All Changes.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
225
Cisco IP Phone Administration
Add Ignore Programmable Soft Key to Silence an Incoming Call

Cisco 8841 Specifications

General

Brand	Cisco
Model	8841
Category	IP Phone
Language	English