Procedure
Step 1 Select Voice > Ext(n), where n is an extension number.
Step 2 In the Audio Configuration section, configure the parameters.
Step 3 Click Submit All Changes.
Configure the Video Codec
Video codecs enable compression or decompression of digital video. You can enable or disable video codecs
from the phone web page.
The Cisco IP Phone 8845 and 8865 supports the H.264 High Profile packetization mode 1, Base Profile Mode
0, and Base Profile packetization mode 1 codecs.
For all codecs, the Real Time Protocol (RTP) payload type is dynamic and you can configure it on the phone
web page from Admin Login > Advanced > Voice > SIP > SDP Payloads Type. For more information, see
SDP Payload Types, on page 279.
Procedure
Step 1 On the phone web page, select Admin Login > Advanced > Voice > Ext(n).
Step 2 In the Video Configuration section, set up the fields as described in Video Configuration, on page 319.
Step 3 Click Submit All Changes.
Set the Optional Network Servers
Optional network servers provide resources such as DNS lookup, network time, logging, and device discovery.
It also enables you to add PC port mirroring on the user phone. Your user can also enable or disable this
service from the phone.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 SelectVoice > System.
Step 2 In the Optional Network Configuration section, set up the fields as described in Optional Network
Configuration, on page 266.
Step 3 Click Submit All Changes.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
52
Cisco IP Phone Installation
Configure the Video Codec
To Next Page
Loading...
Need help?
General
