DescriptionDefaultField Type or
Choices
Field
Allows you to select the wireless signal standard that
is used in the WLAN.
Auto• Auto
• 2.4 GHz
• 5 GHz
802.11 mode
Turn the Wi-Fi On or Off from the Phone Web Page
You can enable or disable the wireless LAN of your phone from the phone web page. You turn on the Wi-Fi
so that the phone connects to a wireless network automatically or manually.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Voice > System.
Step 2 Set the Wi-Fi Settings fields as described in the Wi-Fi Settings, on page 269 table.
Set Up a Wi-Fi Profile from the Phone Web Page and the XML
Provisioning Server
You can configure a Wi-Fi profile from the phone web page or from remote device profile resync and then
associate the profile to the available Wi-Fi networks. You can use this Wi-Fi profile to connect to a Wi-Fi.
You can configure maximum of four profiles.
The profile contains the parameters required for phones to connect to the phone server with Wi-Fi. When you
create and use a Wi-Fi profile, you or your users do not need to configure the wireless network for individual
phones.
A Wi-Fi profile enables you to prevent or limit changes to the Wi-Fi configuration on the phone by the user.
We recommend that you use a secure profile with TFTP encryption enabled to protect keys and passwords
when you use a Wi-Fi profile.
When you set up the phones to use EAP-FAST, PEAP-MSCHAPV, or PEAP-GTC authentication or security
mode, your users need individual credentials to sign into the phone.
Before you begin
• Access the phone administration web page. See Access the Phone Web Page, on page 88.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
48
Cisco IP Phone Installation
Turn the Wi-Fi On or Off from the Phone Web Page
To Next Page
Loading...
Need help?
General
