Procedure
Step 1 Select Voice > Phone.
Step 2 In the Broadsoft XMPP section, set the fields as described in Broadsoft XMPP, on page 313.
Step 3 Click Submit All Changes.
Bluetooth Handsfree Profile Audio Gateway
Cisco IP Phones 8851 and 8861 support Hands-free Audio Gateway mode to work with your Bluetooth
headset.
Configure Bluetooth Handsfree from Configuration Utility
Procedure
Step 1 On the Configuration Utility page, click Admin Login > advanced > Voice > Phone > Handsfree.
Step 2 Under Handsfree, select a Bluetooth Mode.
Step 3 Select a line.
You can select a line from 1 to 10 for Handsfree. When a line is configured as Handsfree line, it displays
mobile phone number and you can only use it for mobile phone. You cannot use it for shared line or speed
dial.
Step 4 Click Submit All Changes.
Shared Lines
A shared line is a directory number that appears on more than one phone. You can create a shared line by
assigning the same directory number to different phones.
Incoming calls display on all phones that share a line, and anyone can answer the call. Only one call remains
active at a time on a phone.
Call information displays on all phones that are sharing a line. If somebody turns on the privacy feature, you
do not see the outbound calls made from the phone. However, you see inbound calls to the shared line.
All phones with a shared line ring when a call is made to the line. If you place the shared call on hold, anyone
can resume the call by pressing the corresponding line key from a phone that shares the line. You can also
press the Select button if the Resume icon is displayed.
The following shared line features are supported:
• Line Seizure
• Public Hold
• Private Hold
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
161
Cisco IP Phone Administration
Bluetooth Handsfree Profile Audio Gateway
To Next Page
Need help?
General
