SIP-700SPA
X8-Port Channelized T1/E1 SPA
X1-Port Channelized OC-3/STM-1 SPA
X1-Port Channelized OC-3 ATM CEoP SPA
X1-Port and 3-Port Clear Channel OC-3 ATM SPA
X1-Port Clear Channel OC-12 ATM SPA
X2-Port OC-3 STM-1/OC-12 STM-4 POS SPA
X4-Port OC-3 STM-1/OC-12 STM-4 POS SPA
X4-Port OC-48/STM-16 POS-RPR SPA
X2-Port Channelized T3/E3 ATM CEoP SPA
1
X24-Port Channelized T1/E1/J1 ATM CEoP SPA
1
The 2-Port Channelized T3/E3 ATM CEoP SPA (SPA-2CHT3-CE-ATM) does not support ATM on
the SIP-700.
Router Hardware Installation
For Cisco ASR 9000 Series Router hardware installation and configuration information, refer to the installation
and configuration guide for your router. The guide includes information on the router switch fabric and how
it affects the operation of SIPs, as well as SIP slot locations, slot width, and other requirements.
References to line cards in the router hardware installation and configuration guides apply equally to SIPs.
Note
Supported Platforms
Cisco ASR 9000 SIP-700 SIPs are supported on all Cisco ASR 9000 Series Routers.
SIP Summary
Summary descriptions of all SIPs supported on the Cisco ASR 9000 Series Router are shown in the following
table.
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
2
Overview: Cisco ASR 9000 Series Router SPA Interface Processors
Router Hardware Installation
To Next Page
Loading...
Need help?
General
