Minimum
Hardware
Revision
Minimum Cisco
IOS XR Release
Number and Type of
Ports
DescriptionProduct Number
1.04.2.01 OC121-Port Clear Channel OC-12 ATM SPA
single-height
SPA-1XOC12-ATM-V2
1.04.3.02 OC122-Port OC-3 STM-1/OC-12 STM-4 POS
SPA
single-height
SPA-2XOC12-POS
1.04.3.04 OC124-Port OC-3 STM-1/OC-12 STM-4 POS
SPA
single-height
SPA-4XOC12-POS
1.04.3.04 OC484-Port OC-48/STM-16 POS/RPR SPA
double-height
SPA-4XOC48POS/RPR
1.04.3.02 T3/E32-Port Channelized T3/E3 ATM CEoP
SPA
single-height
SPA-2CHT3-CE-ATM
1.04.3.024 T1/E124-Port Channelized T1/E1/J1 CEoP SPA
single-height
SPA-24CHT1-CE-ATM
1.05.1.18 T1/E18-Port Channelized T1/E1 SPA
single-height
SPA-8XCHT1/E1-V2
1.05.1.11 OC481-Port OC-48/STM16 SPA
single-height
SPA-1XOC48POS/RPR
2.06.3.1
2.06.4.14 serial
4-Port Serial SPA
single-height
SPA-4XT-Serial
The minimum FPD version for the SPA-4XT-Serial SPA is 1.04. Refer to the "Upgrading FPD" chapter in the System
Management Configuration Guide for Cisco ASR 9000 Series Routers for information on how to verify image versions
and how to perform an upgrade for SPA FPD images.
Note
Checking Hardware and Software Compatibility
To check the minimum software requirements of Cisco IOS XR software with the hardware installed on your
router, Cisco maintains the Software Advisor tool on Cisco.com. This tool does not verify whether SIPs or
SPAs within a system are compatible, but it does provide the minimum Cisco IOS XR requirements for
individual hardware modules or components.
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
11
Overview: Cisco ASR 9000 Series Router Shared Port Adapters
Checking Hardware and Software Compatibility
To Next Page
Loading...
Need help?
General
