Cisco ASR 1001-X Installation Guide

B-1
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
APPENDIX
B
Cisco ASR 1001-X Router Signals and Pinouts
This appendix provides the Cisco ASR 1001-X Router signals and pinout specifications.
Management Ethernet Port Signals and Pinouts
Table B-1 lists the Management Ethernet 10/100 RJ-45 port pinouts.
Console Port Signals and Pinouts
Table B-2 lists the pinouts of the dual RJ-45 ports for the front panel console port.
.
Table B-1 RJ-45 Management Ethernet Port Pinouts
Pin Signal Direction Description
1 TX/RX AData + I/O T/R data +
2 TX/RX AData - I/Ot T/R data -
3 TX/RX BData + I/O T/R Data +
4 TX/RX CData + I/O T/R Data + (Unused for 10/100)
5 TX/RX CData - I/O T/R Data - (Unused for 10/100)
6 TX/RX BData - I/O T/R Data -
7 TX/RX DData + I/O T/R Data + (Unused for 10/100)
8 TX/RX DData - I/O T/R Data - (Unused for 10/100)
Table B-2 Console Port Pinout for Cisco ASR 1001-X Router
Pin Signal Direction Description
1
RTS Output Request to Send (tied to pin 8, CTS)
2
DTR Output Data Terminal Ready (always On)
3
TXD Output Transmit Data
4
GND — Ring Indicator
5
GND — —
6
RXD Input Receive Data

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g