2-3
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
Chapter 2 Cisco ASR 1001-X Router Supported Hardware Components
Supported Small Form-Factor Pluggable (SFP and SFP+) Transceivers
Supported Small Form-Factor Pluggable (SFP and SFP+)
Transceivers
Table 2-3 and Table 2-4 list the supported SFP optics and SFP copper interfaces on the Cisco ASR
1001-X Router.
SPA-4XOC3-POS-V2 4-port OC-3/STM-1 POS
SPA-2X1GE-SYNCE
1
Cisco Synchronous Ethernet SPA
SPA-8XT3/E3 Cisco 8-Port Clear Channel T3/E3 Shared Port
Adapter
SPA-24CHT1-CE-ATM Cisco 24 Port T1/E1/J1 Circuit Emulation SPA
1. There is a limitation for clock switchover scenarios between the Cisco ASR 1001-X Router's built-in ports and the
Metronome SPA. All the other functionalities on the Metronome SPA are supported.
Table 2-2 Supported Half-Height SPAs (continued)
PID Description
Table 2-3 Supported 1 GE SFP Optics and SFP Copper Interfaces
PID Description
SFP-GE-S 1000BASE-SX SFP (DOM)
GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF,
850nm, DOM
SFP-GE-L 1000BASE-LX/LH SFP (DOM)
GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module,
MMF/SMF, 1310nm, DOM
SFP-GE-Z 1000BASE-ZX Gigabit Ethernet SFP (DOM)
SFP-GE-T 1000BASE-T SFP (NEBS 3 ESD)
GLC-BX-U 1000BASE-BX SFP, 1310NM
GLC-BX-D 1000BASE-BX SFP, 1490NM
GLC-GE-100FX 100FX SFP on GE ports
GLC-SX-MM GE SFP, LC connector SX transceiver
GLC-LH-SM GE SFP, LC connector LX/LH transceiver
GLC-EX-SMD GE SFP, LC Connector, EX transceiver
GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF,
1550nm, DOM
DWDM-SFP 1000BASE DWDM
CWDM-SFP 1000BASE CWDM