Cisco ASR 1001-X Installation Guide

3-9
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
Chapter 3 Preparing Your Site for Installation
Site Planning
• Do not spill food or liquids on your system components and never operate the product in a wet
environment.
• Do not push any objects into the openings of your system components. Doing so can cause fire or
electric shock by shorting out interior components.
• Position system cables and power supply cable carefully. Route system cables and power supply
cable and plug such that they cannot be stepped on or tripped over. Be sure that nothing else rests
on your system component cables or power cable.
• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site
modifications. Always follow your local and national wiring rules.
• If you turn off your system, wait at least 30 seconds before turning it on again to avoid system
component damage.
Site Selection Guidelines
The Cisco ASR 1001-X Router requires specific environmental operating conditions. Temperature,
humidity, altitude, and vibration can affect the performance and reliability of the router. The following
sections provide specific information to help you plan for a proper operating environment.
The Cisco ASR 1001-X Router is designed to meet the industry EMC, safety, and environmental
standards described in the Regulatory, Safety, and Compliance Information for Cisco ASR 1000 Series
Aggregation Services Routers document.
Site Environmental Requirements
Environmental monitoring protects the system and components from damage caused by excessive
voltage and temperature conditions. To ensure normal operation and avoid unnecessary maintenance,
plan and prepare your site configuration before installation. After installation, make sure the site
maintains the environmental characteristics, as shown in Table 3-2.
Table 3-2 Cisco ASR 1001-X Router Environmental Tolerance
Environmental Characteristic Minimum Maximum
Operating temperature (nominal) 0° C 40° C
(40° C up to 10,000 feet)
Operating temperature (short term) 0° C 50° C
Storage temperature –20° C +70° C
Operative humidity (nominal) (relative humidity) 10% 90%
Operative humidity (short term) 5% 90%
Storage humidity (relative humidity) 5% 95%
Altitude, operating: over allowable temperature
range (0 to 50 degrees C)
–500 feet 10,000 feet
Altitude, nonoperating: over allowable temperature
range
–1000 feet 50,000 feet

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g