EasyManuals Logo
Home>Cisco>Network Router>ASR 1001-X

Cisco ASR 1001-X Installation Guide

Cisco ASR 1001-X
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
2-8
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
Chapter 2 Cisco ASR 1001-X Router Supported Hardware Components
Cisco ASR 1001-X Router Power Supplies
AC/DC Power System Input Range and Voltage for the Cisco ASR 1001-X Router
The power supply DC Input Range is –40 to –72 VDC, and the AC Input Range is +85 to +264 VAC.
Table 2-7 describes the Cisco ASR 1001-X Router power supply LEDs.
Power Cords Supported by the Cisco ASR 1001-X Router
Table 2-8 lists the power cords that are supported by the Cisco ASR 1001-X Router.
Table 2-7 Cisco ASR 1001-X Router—AC and DC Power Supply LEDs
LED Color and State Description
OK - (Solid green) Input power is on and within the normal operating range. On the
AC unit, the LED is solid green when the system in powered on.
When the system is powered off, the LED will blink until the
AC power is removed.
OK - (Blinking Green at the rate of
one blink per second)
Input power that is within the normal operating range is being
supplied, but the Standby switch is in the Standby position (and
not in the On position).
Fail - (Red) Power output has failed.
Off Power supply is shut down.
Table 2-8 Power Cords Supported by the Cisco ASR 1001-X Router
Power Cord Item Number Description
CAB-AC Power Cord, 110 V
CAB-ACA Plug Power Cord, Australia, 10 A
CAB-ACC Power Cord, China
CAB-ACE AC Power Cord, Europe, C13, CEE 7, 1.5 M
CAB-ACI AC Power Cord, Italy, C13, CEI 23-16, 2.5 m
CAB-ACR AC Power Cord, Argentina, C13, EL 219 (IRAM 2073),
2.5m
CAB-ACS AC Power Cord, Switzerland, C13, IEC 60884-1, 2.5 m
CAB-ACU AC Power Cord, UK, C13, BS 1363, 2.5 m
CAB-IND AC Power Cord, India
CAB-JPN AC Power Cord, Japan, C13, JIS C 8303, 2.5 m
CAB-L620P-C13-US Power Cord, 250 VAC, 15A, NEMA L6-20 to C13,
U.S.
CAB-L620P-C13-JPN Power Cord, 250 VAC, 15A, NEMA L6-20 to C13,
Japan
CAB-C13-CBN Cabinet
Jumper
Power Cord, 250 VAC 10 A, C14-C13 Connectors

Table of Contents

Other manuals for Cisco ASR 1001-X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1001-X and is the answer not in the manual?

Cisco ASR 1001-X Specifications

General IconGeneral
Product colorGray
Rack capacity1U
Rack mountingYes
Networking standards-
Ethernet LAN (RJ-45) ports6
Installed SFP modules quantity2
Flash memory1024 MB
Internal memory8192 MB
Processor cores4
AC input voltage85 - 264 V
Power source typeAC
Power consumption (typical)250 W
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 50 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 90 %
Security algorithmsAES
Weight and Dimensions IconWeight and Dimensions
Depth461.5 mm
Width439.42 mm
Height43.43 mm
Weight10590 g

Related product manuals