Cisco ASR 1001-X Installation Guide

CHAPTER
6-1
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
6
Cisco ASR 1001-X Router License Verification
This chapter provides information about verifying the Cisco IOS license level, viewing the Cisco ASR
1001-X Router license, and configuring the throughput level.
This chapter contains the following sections:
• Viewing the Cisco IOS License Level, page 6-1
• Configuring the Throughput Level, page 6-2
• Viewing License Information, page 6-3
• Per Port Counted License (10-GE Interfaces), page 6-7
Viewing the Cisco IOS License Level
Use the show version command to determine the Cisco IOS license level in the router. For example:
Router# show version
.
.
.
License Level: adventerprise
License Type: RightToUse
Next reload license Level: adventerprise
.
.
.
Table 6-1 show version Command Output Description
Field Name Description
License Level: adventerprise Indicates the current Cisco IOS license code level.
License Type: RightToUse
Indicates whether you are utilizing a permanent
(purchased) license, an evaluation 60-day license,
or a Right-to-Use license that would indicate that
the purchase of a license is required.
Next reload license Level: adventerprise
Indicates the startup configuration definition that
will be used for the next reload instance.

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g