Cisco ASR 1001-X Installation Guide

2-7
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
Chapter 2 Cisco ASR 1001-X Router Supported Hardware Components
Cisco ASR 1001-X Router Power Supplies
Figure 2-2 Cisco ASR 1001-X Router AC Power Supply
Cisco ASR 1001-X Router DC Power Supply
The Cisco ASR 1001-X Router DC input connector is a two-wire connector with connection polarity
from left to right (when facing the unit) of negative (–) positive (+).
The power supply has a handle to be used for insertion and extraction. The module must be supported
with one hand because of its length. Figure 2-3 shows the Cisco ASR 1001-X Router DC power supply.
Figure 2-3 Cisco ASR 1001-X Router DC Power Supply
371155
1
2 4
3
1 Handle 3 AC power connector
2 FAIL and OK LEDs 4 Retaining latch
1 Handle 3 DC power connector
2 FAIL and OK LEDs Retaining latch
1 3
42
371154

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g