Cisco ASR 5000 Series Thresholding Configuration Guide

Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
103
Chapter 17
PDIF Thresholds
Thresholds generate alerts or alarms based on either the total number of PDIF calls setup by the system during the
specified polling interval, or on the number of currently active calls only.
Alerts or alarms are triggered for call setups based on the following rules:
Enter condition: Actual number of call setups > or = High Threshold
Clear condition: Actual number of call setups < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Default value is 0, which means there will be no monitoring.
The polling interval is in seconds and it is an integer between 30 and 60000. Entries will be rounded up to the nearest 30
seconds.

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English