Cisco ASR 5000 Series Thresholding Configuration Guide

Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
33
Chapter 4
Call Setup Thresholds
Threshold monitoring can be enabled for the call setup values described in the following table.
Value
Description
To configure, go to
section:
Number of calls setup
Enables the generation of alerts or alarms based on the number of calls
setup by the system during the polling interval.
Call Setup
Thresholds
Number of call setup failures
Enables the generation of alerts or alarms based on the number of call
setup failures experienced by the system during the polling interval.
Call Setup Failure
Thresholds
RP setup failure rate
Enables the generation of alerts or alarms based on the rate at which RP
failures are experienced by the system during the polling interval.
RP Setup Failure
Rate Thresholds
PPP setup failure rate
Enables the generation of alerts or alarms based on the rate at which PPP
failures are experienced by the system during the polling interval.
PPP Setup Failure
Rate Thresholds
Number of calls rejected due to
no processing resources being
available
Enables the generation of alerts or alarms based on the number of calls
rejected by the system due to insufficient resources (memory and/or
session licenses) during the polling interval.
No Resource Call
Reject Thresholds

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English