Cisco ASR 5000 Series Thresholding Configuration Guide

Port Utilization Thresholds
High Port Activity Thresholds ▀
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
127
High Port Activity Thresholds
High port activity thresholds generate alerts or alarms based on the peak utilization percentage of each configured port
during the specified polling interval. This threshold is configured on a per-port basis.
Alerts or alarms are triggered for high port activity based on the following rules:
Enter condition: Actual percent peak utilization of a port > or = High Threshold
Clear condition: Actual percent peak utilization of a port < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring High Port Activity Thresholds
Use the following example to configure the polling interval over which to measure for high port activity:
configure
threshold poll port-high-activity interval <time>
port <port-type> <slot#/port#>
threshold high-activity <high_thresh_%> [ clear <low_thresh_%> ]
threshold monitoring
end

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English