Cisco ASR 5000 Series Thresholding Configuration Guide

Total Session Thresholds
Total SGSN Session Thresholds ▀
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
157
Total SGSN Session Thresholds
Total SGSN session thresholds generate alerts or alarms based on the total number of attached subscribers facilitated by
all SGSN services configured on the system during the specified polling interval.
Alerts or alarms are triggered for the total of all subscribers attached to the SGSN based on the following rules:
Enter condition: Actual total number of attached subscribers > or = High Threshold
Clear condition: Actual total number of attached subscribers < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring Total SGSN Session Thresholds
Use the following example to configure the per-SGSN service thresholds:
configure
threshold total-sgsn-sessions <high_thresh> [ clear <low_thresh> ]
threshold poll total-sgsn-sessions interval <time>
end

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English