Cisco ASR 5000 Series Thresholding Configuration Guide

CSCF Service Thresholds
Configuring CSCF Thresholds ▀
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
59
threshold error-presence <high_thresh> [ clear <low_thresh>]
threshold error-reg-auth <high_thresh> [ clear <low_thresh>]
threshold error-tcp <high_thresh> [ clear <low_thresh>]
threshold invite-rcvd-rate <high_thresh> [ clear <low_thresh>]
threshold reg-rcvd-rate <high_thresh> [ clear <low_thresh>]
threshold reg-total-active <high_thresh> [ clear <low_thresh>]
threshold route-failures <high_thresh> [ clear <low_thresh>]
end
Configuring Threshold Poll Intervals
The following threshold poll intervals can be configured for the CSCF Service:
CSCF call setup failures
CSCF total active calls
CSCF calls
CSCF registrations
CSCF service route failures
CSCF no resource errors
CSCF presence errors
CSCF Reg-Auth errors
CSCF TCP errors
CSCF total active registrations
Use the following example to configure these threshold poll intervals:
configuration
threshold poll call-setup-failures interval <dur>
threshold poll call-total-active interval <dur>
threshold poll cscf-invite-rcvd interval <dur>
threshold poll cscf-reg-rcvd interval <dur>
threshold poll cscf-service-route-failures interval <dur>
threshold poll error-no-resource interval <dur>
threshold poll error-presence interval <dur>
threshold poll error-reg-auth interval <dur>

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English