Cisco ASR 5000 Series Thresholding Configuration Guide

CSCF Service Thresholds
▀ Configuring CSCF Thresholds
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
58
OL-25552-02
Configuring CSCF Thresholds
This section describes how to enable and configure CSCF Service thresholds.
Enabling CSCF Service Thresholds
To enable threshold monitoring for a CSCF service, use the following configuration:
configure
context <context_name>
cscf-service <name>
threshold monitoring
end
Configuring CSCF Service Thresholds
The following thresholds can be configured for a CSCF Service:
Number of CSCF call setup failures
Number of total active CSCF calls
Number of CSCF call setup failures due to no-resource
Number of CSCF Presence errors
Number of CSCF Registration Authentication failures
Number of CSCF call setup failures due to TCP error
Number of CSCF calls per polling interval
Number of CSCF registrations per polling interval
Number of total CSCF active registrations
Maximum number of route-failures, after which the alarm/alert will be raised
Use the following example to configure these thresholds:
configuration
context <context_name>
cscf-service <name>
threshold call-setup-failures <high_thresh> [ clear <low_thresh>]
threshold call-total-active <high_thresh> [ clear <low_thresh> ]
threshold error-no-resource <high_thresh> [ clear <low_thresh>]

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English