Cisco ASR 5000 Series Thresholding Configuration Guide

AAA Thresholds
AAA Request Message Retry Rate Thresholds ▀
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
27
AAA Request Message Retry Rate Thresholds
AAA request message retry rate thresholds generate alerts or alarms based on the percentage of request messages (both
authentication and accounting) that were retried during the specified polling interval. The percentage is based on a
message count taken for all AAA authentication and accounting servers that the system is configured to communicate
with.
Alerts or alarms are triggered for request message retries based on the following rules:
Enter condition: Actual failure percentage > or = High Threshold
Clear condition: Actual failure percentage < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring AAA Authentication Failure Rate Threshold
Use the following example for configuring AAA request message retriy rate threshold:
configure
threshold aaa-retry-rate <high_thresh>[ clear <low_thresh> ]
threshold poll aaa-retry-rate interval <time>
threshold monitoring aaa-retry-rate
end

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English