Cisco ASR 5000 Series Thresholding Configuration Guide

Per-service Session Thresholds
▀ Per-GPRS Service PDP Contexts Thresholds
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
120
OL-25552-02
Per-GPRS Service PDP Contexts Thresholds
Per-GPRS service PDP context thresholds generate alerts or alarms based on the total number of PDP contexts
facilitated by any GPRS service session configured on the system during the specified polling interval.
Alerts or alarms are triggered for sessions per-GPRS service based on the following rules:
Enter condition: Actual total number of PDP contexts > or = High Threshold
Clear condition: Actual total number of PDP contexts < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring Per-GPRS Service PDP Contexts Thresholds
Use the following example to configure the per-GPRS service PDP contexts thresholds:
configure
threshold per-service-gprs-pdp-sessions <high_thresh> [ clear <low_thresh> ]
threshold poll per-service-gprs-pdp sessions interval <time>
threshold monitoring subscriber
end

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English