Cisco ASR 5000 Series Thresholding Configuration Guide

Call Setup Thresholds
▀ Call Setup Failure Thresholds
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
36
OL-25552-02
Call Setup Failure Thresholds
Call setup failure thresholds generate alerts or alarms based on the total number of call setup failures experienced by the
system during the specified polling interval.
Alerts or alarms are triggered for call setup failures based on the following rules:
Enter condition: Actual number of call setup failures > or = High Threshold
Clear condition: Actual number of call setup failures < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring Call Setup Failure Thresholds
Use the following example for configuring call setup failure thresholding:
configure
threshold call-setup-failure <high_thresh> [ clear <low_thresh> ]
threshold poll call-setup-failure interval <time>
threshold monitoring call-setup
end

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English