Cisco ASR 9001 Hardware Installation Guide

Supplemental Bonding and Grounding Connections
Before you power on the router for the first time, we recommend that you connect the central office ground
system or Network Equipment Building System (NEBS) to the threaded supplemental bonding and grounding
receptacles on the router. For more information on supplemental bonding and grounding cable requirements,
see NEBS Supplemental Unit Bonding and Grounding Guidelines, on page 22.
Use this procedure to attach a grounding cable lug to the router:
Procedure
Step 1
Insert the grounding screws through the locking washers, and into the threaded grounding receptacle on the
chassis as shown in the following figure.
Step 2
Tighten the grounding screws securely to the receptacles.
Step 3
Prepare the other end of the grounding wire, and connect it to the appropriate grounding point at your site to
ensure an adequate earth ground.
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
42
Unpacking and Installing the Chassis
Supplemental Bonding and Grounding Connections

Cisco ASR 9001 Specifications

General

Brand	Cisco
Model	ASR 9001
Category	Network Router
Language	English