Cisco ASR 9001 Hardware Installation Guide

What to Do Next
Figure 31: Installing the Cisco ASR 9001 Chassis in a Two-Post Rack
Three screws on each side (minimum two) to attach
the chassis to the rack
1
Installing the Chassis in a Four-Post Rack
If you are installing the chassis without air plenum kit, you will need two side mounting brackets used to
attach the chassis to the rear posts as shown in the figure below. See Before you Begin, on page 36 for
mounting bracket information.
To install the chassis in a four-post open rack, follow these steps:
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
39
Unpacking and Installing the Chassis
Installing the Chassis in a Four-Post Rack

Cisco ASR 9001 Specifications

General

Brand	Cisco
Model	ASR 9001
Category	Network Router
Language	English