The following figure shows an example of an RP with data terminal and modem connections called out.
Figure 54: RP Console and Auxiliary Port Connections
RJ-45 cables3Console terminal1
Console and Auxiliary
port
4Modem2
The ports labeled Ethernet, Console, and AUX are safety extra-low voltage (SELV) circuits. SELV circuits
should only be connected to other SELV circuits.
Caution
RP cables are not available from Cisco, but they are available from external commercial cable vendors.Note
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
78
Installing Modules and Cables in the Chassis
Connecting Route Processor Cables