Cisco ASR 903 Hardware Installation Guide

The optical interface module is designed for OC-3 and OC-12 traffic. OC-12 is only supported on the
RSP1 module on the router.
Note
Figure 29: 4-port OC-3 Interface Module
For information on supported SFP modules, see Cisco ASR 900 Series Aggregation Services Routers Data
Sheet.
For more information about installing an optical interface module, see Interface Module Installation.
Cisco ASR 903 Aggregation Services Router Hardware Installation Guide
38
Cisco ASR 903 Router Overview
Interface Modules

Cisco ASR 903 Specifications

General

Brand	Cisco
Model	ASR 903
Category	Network Router
Language	English