Cisco ASR 903 Hardware Installation Guide

CHAPTER 2
Preparing for Installation
This chapter describes how to prepare for the installation of the Cisco ASR 903 Router at your site.
•
Safety Guidelines, page 53
•
Site Planning, page 63
•
Receiving the Cisco ASR 903 Router, page 74
Safety Guidelines
Before you begin the installation of the Cisco ASR 903 Router, review the safety guidelines in this chapter
to avoid injuring yourself or damaging the equipment.
In addition, before replacing, configuring, or maintaining the Cisco ASR 903 Router, review the safety
warnings listed in Regulatory Compliance and Safety Information for the Cisco ASR 903 Router.
Standard Warning Statements
To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance and
Safety Information document that accompanied this device.
The appliance must be connected to a grounded outlet. Statement 0414Warning
To avoid or reduce the risk of personal injury, do not use the product if the product has been exposed to
irregular environmental conditions, if the product has been misused or if parts of the product have been
damaged. Consult qualified service personnel. Never try to service the product yourself. Statement 0416
Warning
To reduce the risk of shock, fire or personal injury, do not place power cables in areas where they may
be walked on or damaged by items placed upon or against it. Statement 0417
Warning
Cisco ASR 903 Aggregation Services Router Hardware Installation Guide
53

Cisco ASR 903 Specifications

General

Brand	Cisco
Model	ASR 903
Category	Network Router
Language	English