Cisco Catalyst 3650 Series Configuration Guide

Configuring General WLAN Properties (GUI)
Use this procedure to perform the following actions on a WLAN:
•
Set WLAN Status
•
Configure Radio Policies
•
Assign Interface/Interface Groups
•
Enable or Disable Multicast VLAN Feature
•
Enable or Disable Broadcast SSID Feature
Before You Begin
Step 1
Click Configuration > Wireless.
The WLANs page is displayed.
Step 2
Locate the WLAN you want to configure by using the search mechanisms on the page.
Step 3
Click on the WLAN Profile of the WLAN.
The WLAN > Edit page is displayed.
Step 4
Click the General tab. This tab is displayed by default.
Step 5
Configure the General parameters.
DescriptionParameter
Displays the configured profile name of the WLAN.Profile Name
Displays the configured LAN type.Type
Displays the configured SSID of the WLAN.SSID
Check box to enable the WLAN. The default value is enabled.Status
WLAN security policies set using the Security tab.Security Policies
WLAN radio policy to enable radios on the WLAN. Values are the following:
•
All
•
802.11a only
•
802.11g only
•
802.11a/g only
•
802.11b/g only
Radio Policy
WLAN Configuration Guide, Cisco IOS XE Release 3E (Catalyst 3650 Switches)
OL-32353-01 35
Configuring WLANs
Configuring General WLAN Properties (GUI)

Cisco Catalyst 3650 Series Specifications

General

Brand	Cisco
Model	Catalyst 3650 Series
Category	Switch
Language	English