Cisco IP Communicator Administration Guide

2-5
Cisco IP Communicator Administration Guide for Cisco CallManager
OL-4698-01
Chapter 2 Preparing to Deploy Cisco IP Communicator
Deployment and Configuration Checklist
Hardware Requirements
Cisco IP Communicator requires the following of the client PC and its
peripherals:
• A minimum of 100 MB free disk space
• A Non-ISA full-duplex sound card (integrated or PCI-based) or USB sound
device
• A 10/100 Mbit Ethernet network interface card
• SVGA Video Card
Related Topics
• Network Requirements, page 2-2
• Cisco CallManager Configuration Requirements, page 2-3
• Platform Requirements, page 2-4
Deployment and Configuration Checklist
Table 2-2 is designed to give you an overview all of the administrative tasks
involved in preparing for, deploying, and configuring Cisco IP Communicator.
The table is broken into three sections:
• Gathering information and adding devices to Cisco CallManager
• Configuring features and settings in Cisco CallManager Administration
• Deploying and configuring the Cisco IP Communicator application
Some of the tasks in the table are not specific to Cisco IP Communicator, but
apply to any Cisco CallManager-supported phone device. Required tasks are
noted.
Note In general, it is preferable to configure the settings in Cisco CallManager
Administration before deploying Cisco IP Communicator to ensure that features
are set up properly for the user at first launch and will remain consistent thereafter.

Cisco IP Communicator Specifications

General

Brand	Cisco
Model	IP Communicator
Category	Software
Language	English