Cisco IP Communicator Administration Guide

4-17
Cisco IP Communicator Administration Guide for Cisco CallManager
OL-4698-01
Chapter 4 Configuring the Application
Understanding Post-Installation Configuration Tasks
Configuring Settings for Remote Use
Depending on the VPN client that is used to connect to the network, users who
run Cisco IP Communicator remotely, or outside of the LAN, might need to
modify certain settings from the Cisco IP Communicator interface. These settings
are described in Table 4-4.
Table 4-4 Modifications for remote use
Configuration task Purpose Where to do it
Optimize for low-bandwidth
(G.729).
Remote users with low bandwidth
connections might experience better
audio quality using a low-bandwidth
codec. (Users might want to apply
listening and/or speaking filters when
using a low-bandwidth codec. See the
“Modifying Advanced Audio Settings”
section on page 4-14 for details.
Cisco IP Communicator
right-click menu:
Preferences > Audio >
Optimize for low
bandwidth check box.

Cisco IP Communicator Specifications

General

Brand	Cisco
Model	IP Communicator
Category	Software
Language	English