5-3
Cisco IP Communicator Administration Guide for Cisco CallManager
OL-4698-01
Chapter 5 Configuring Features and Services
Telephony Features Available for Cisco IP Communicator
Barge Allows a user to join an
in-progress call on a shared line.
Refer to Cisco CallManager Features and Services
Guide
Call park Places the call on hold so anyone
connected to the
Cisco CallManager system can
retrieve it.
• Refer to Cisco CallManager Administration
Guide
• Refer to Cisco CallManager Features and
Services Guide
Call pickup Picks up incoming calls within a
group.
• Refer to Cisco CallManager Administration
Guide
• Refer to Cisco CallManager System Guide
Call waiting Receives a second incoming call
on the same line without
disconnecting the first call.
• Refer to Cisco CallManager Administration
Guide
• Refer to Cisco CallManager System Guide
Caller ID Displays the telephone number
and name of the caller.
Refer to Cisco CallManager Administration Guide
Conference Initiates an ad hoc conference
and then conferences in other
participants one at a time.
• Refer to Cisco CallManager Administration
Guide
• Refer to Cisco CallManager System Guide
Consecutive
ring
Identifies ring type used when
Cisco IP Communicator has
another active call on a different
line.
Refer to Cisco CallManager Administration Guide
for information about adjusting ring settings (when
idle/when active) in the Directory Number
Configuration page.
Users can adjust their ring settings from the User
Options web pages by clicking Change the Ring
Settings for your phone.
Forward Forwards all calls to the
designated directory number.
Refer to Cisco CallManager Administration Guide
Group call
pickup
Allows users to pick up
incoming calls within their own
group or in other groups.
• Refer to Cisco CallManager Administration
Guide
• Refer to Cisco CallManager System Guide
Table 5-1 Configuring telephony features using Cisco CallManager Administration (continued)
Feature Description Configuration References