Cisco RV132W Command Line Interface Reference Guide

Management Commands
syslog
Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router CLI Reference Guide 19
3
router06000a>swversion
syslog
The syslog command provides a transport to allow a device to send event
notification messages across various IP networks to syslog servers. The syslog
command is listed here.
• syslog dump
syslog dump
The syslog dump command displays all the syslog outputs.
Parameter
None.
Default Configuration
None.
Example
The following example is to display the syslog outputs.
router06000a> syslog dump
traceroute
The traceroute command displays the route (path) and measures the transit
delays of the packets across an IP.
Parameters
4, 6 - Specifies the IPv4 or IPv6 name resolution.
F - Sets the do not fragment bit.

Cisco RV132W Specifications

General

Brand	Cisco
Model	RV132W
Category	Network Router
Language	English