Cisco RV132W Command Line Interface Reference Guide

Configuration Commands
vpn
Cisco RV34xx Router CLI Reference Guide 33
4
Example
The following example displays how to delete the vlan88.
router06000a>vlan delete --vid 88
vlan show
To show the VLAN, use the vlan show command.
Parameters
vlan show - Enter vlan show.
Default Configuration
None.
Example
The following example displays the vlan show command.
router06000a>vlan show
vpn
The vpn command and subcommands are used for working with various
aspects of the vpn. The vpn commands executed on the command line
generate status information on vpn processes, or are used to stop and start
specific vpn services. All vpn commands are listed here:
• vpn add --name connection-name --psk pre-shared key --rwan remote
wan IP --rlan remote lan IP --rmask remote lan mask --lan local lan ip --
lanmask local lan mask
• vpn stop --name connection-name
• vpn start --name connection-name
• vpn restart

Cisco RV132W Specifications

General

Brand	Cisco
Model	RV132W
Category	Network Router
Language	English