Cisco RV215W Administration Guide

Configuring VPN
Configuring Advanced VPN Parameters
Cisco RV215W Wireless-N VPN Firewall Administration Guide 107
9
• Enable—Enable the policy.
• Disable—Disable the policy.
• Delete—Delete the policy.
NOTE You cannot delete an IKE policy if it is being used in a VPN policy. You must first
disable and delete the VPN policy in the VPN Policy Table.
• Add Row—Add an IKE policy. See Adding or Editing IKE Policies.
NOTE If you have a VPN connection already configured, you cannot add another without
deleting the existing VPN connection.
STEP 3 Click Save.
Adding or Editing IKE Policies
STEP 1 When adding or editing IKE policies, configure the following settings:
• Policy Name—Enter a unique name for the policy for identification and
management purposes.
• Exchange Mode—Choose one of the following options:
- Main—Negotiates the tunnel with higher security, but is slower.
- Aggressive—Establishes a faster connection, but with lowered security.
• Local Identifier—Local IKE identifier.
• Remote Identifier—Remote IKE identifier.
• Redundancy Identifier—The unique identifier for the alternate backup
endpoint used to restore the connection if the original VPN connection fails.
STEP 2 In the IKE SA Parameters section, the Security Association (SA) parameters
define the strength and mode for negotiating the SA. You can configure the
following settings:
• Encryption Algorithm—Choose the algorithm used to negotiate the SA:
- DES
- 3DES
- AES-128

Cisco RV215W Specifications

General

VPN support	3DES, PPTP, L2TP
Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1Q
VPN tunnels quantity	6
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi band	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	4
Input current	1.67 A
Supported protocols	PPPoE, PPTP, L2TP, RSTP, NAT, DynDNS, PAT, DMZ
Security algorithms	WEP, WPA, WPA2, WPS
Antennas quantity	2
Certification	FCC Class B, CE, IC, UL, cUL, Wi-Fi, C-Tick
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Product color	Black

Weight and Dimensions

Width	150 mm
Height	30 mm
Weight	300 g