EasyManuals Logo
Home>Cisco>Firewall>RV215W

Cisco RV215W Administration Guide

Cisco RV215W
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
Configuring the Wireless Network
Configuring Basic Wireless Settings
Cisco RV215W Wireless-N VPN Firewall Administration Guide 69
7
Configuring Basic Wireless Settings
You can use the Basic Settings page (Wireless > Basic Settings) to configure
basic wireless settings.
To configure basic wireless settings:
STEP 1 Choose Wireless > Basic Settings.
STEP 2 In the Radio field, check Enable to turn on the wireless radio. By default there is
only one wireless network enabled, ciscosb1.
STEP 3 In the Wireless Network Mode field, choose one of these options from the
drop-down menu:
Wireless
Isolation
with SSID
Disabled Disabled Disabled Disabled
WMM Enabled Enabled Enabled Enabled
WPS
Hardware
Button
Enabled Disabled Disabled Disabled
1. When using Setup Wizard, select Best Security or Better Security to protect the device
from unauthorized access.
SSID Name ciscosb1 ciscosb2 ciscosb3 ciscosb4
B/G/N-Mixed Choose this option if you have Wireless-N,
Wireless-B, and Wireless-G devices in your
network. This is the default setting (recommended).
B Only Choose this option if you have only Wireless-B
devices in your network.
G Only Choose this option if you have only Wireless-G
devices in your network.
N Only Choose this option if you have only Wireless-N
devices in your network.

Table of Contents

Other manuals for Cisco RV215W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV215W and is the answer not in the manual?

Cisco RV215W Specifications

General IconGeneral
VPN support3DES, PPTP, L2TP
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1Q
VPN tunnels quantity6
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi bandNo
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports4
Input current1.67 A
Supported protocolsPPPoE, PPTP, L2TP, RSTP, NAT, DynDNS, PAT, DMZ
Security algorithmsWEP, WPA, WPA2, WPS
Antennas quantity2
CertificationFCC Class B, CE, IC, UL, cUL, Wi-Fi, C-Tick
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Width150 mm
Height30 mm
Weight300 g

Related product manuals