EasyManuals Logo
Home>Cisco>Firewall>RV215W

Cisco RV215W Administration Guide

Cisco RV215W
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Configuring Networking
Configuring the LAN Settings
Cisco RV215W Wireless-N VPN Firewall Administration Guide 39
6
After changing the device IP address, your PC is no longer able to display Device
Manager.
To display Device Manager, do one of the following:
If DHCP is configured on the device, release and renew your PC IP address.
Manually assign an IP address to your PC. The address must be on the same
subnetwork as the device. For example, if you change the device IP address
to 10.0.0.1, assign your PC an IP address in the range of 10.0.0.2 to 10.0.0.255.
Open a new browser window and enter the new IP address of the device to
reconnect.
Configuring the DHCP Server
By default, the device functions as a DHCP server to the hosts on the Wireless
LAN (WLAN) or wired LAN. It assigns IP addresses, and provides DNS server
addresses.
With DHCP enabled, the device assigns IP addresses to network devices on the
LAN from a pool of IPv4 addresses. The device tests each address before it is
assigned to avoid duplicate addresses on the LAN.
The default IP address pool is 192.168.1.100 to 192.168.1.149. To set a static IP
address on a network device, use an IP address outside the pool. For example,
assuming the DHCP pool is set to the default parameters, static IP addresses from
192.168.1.2 to 192.168.1.99 IP address pool can be used. This prevents conflicts
with the DHCP IP address pool.
To configure DHCP settings:
STEP 1 Choose Networking > LAN > LAN Configuration.
STEP 2 (Optional) Select a VLAN to edit from the drop-down list.
STEP 3 In the DHCP Server field, select one of the following options:
Enable Allows the device to act as the DHCP server in the network.
Disable Disables DHCP on the device when you want to manually
configure the IP addresses of all of your network devices.

Table of Contents

Other manuals for Cisco RV215W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV215W and is the answer not in the manual?

Cisco RV215W Specifications

General IconGeneral
VPN support3DES, PPTP, L2TP
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1Q
VPN tunnels quantity6
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi bandNo
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports4
Input current1.67 A
Supported protocolsPPPoE, PPTP, L2TP, RSTP, NAT, DynDNS, PAT, DMZ
Security algorithmsWEP, WPA, WPA2, WPS
Antennas quantity2
CertificationFCC Class B, CE, IC, UL, cUL, Wi-Fi, C-Tick
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Width150 mm
Height30 mm
Weight300 g

Related product manuals