Cisco RV215W Administration Guide

Administering Your Router
Restarting the Cisco RV215W
Cisco RV215W Wireless-N VPN Firewall Administration Guide 141
11
!
CAUTION Resetting the device to default factory settings erases all of your configuration
settings.
STEP 5 Click Start Upgrade.
After the new firmware image is validated, the new image is written to the device
flash memory, and the router is automatically rebooted with the new firmware. The
System Information section displays the latest firmware.
Changing the Language
To change the language:
STEP 1 Choose Administration > Firmware/Language Upgrade.
STEP 2 In the File Type field, click the Language File button.
STEP 3 Click Browse to locate and select the language file.
STEP 4 Optionally, to restore the device configuration parameters to factory default vaues,
select Reset all configuration/settings to factory defaults.
STEP 5 Click Start Upgrade.
Restarting the Cisco RV215W
To restart the router:
STEP 1 Choose Administration > Reboot.
STEP 2 Click Reboot.

Cisco RV215W Specifications

General

VPN support	3DES, PPTP, L2TP
Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1Q
VPN tunnels quantity	6
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi band	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	4
Input current	1.67 A
Supported protocols	PPPoE, PPTP, L2TP, RSTP, NAT, DynDNS, PAT, DMZ
Security algorithms	WEP, WPA, WPA2, WPS
Antennas quantity	2
Certification	FCC Class B, CE, IC, UL, cUL, Wi-Fi, C-Tick
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Product color	Black

Weight and Dimensions

Width	150 mm
Height	30 mm
Weight	300 g