Configuring Networking
Configuring the LAN Settings
Cisco RV215W Wireless-N VPN Firewall Administration Guide 40
6
If you enabled the device DHCP server, enter this information:
STEP 4 If you selected DHCP Relay, enter the address of the relay gateway in the Remote
DHCP Server field. The relay gateway transmits DHCP messages to network
device, including those on other subnetworks.
STEP 5 Click Save.
Configuring VLANs
A Virtual LAN (VLAN) is a group of endpoints in a network that are associated by
function or other shared characteristics. Unlike LANs that are typically
geographically based, VLANs can group endpoints without regard to the physical
location of the equipment or users.
The device has a default VLAN (VLAN 1) that cannot be deleted. You can create up
to four other VLANs on the device.
DHCP Relay Relays the IP addresses assigned by a another DHCP server
to the network devices.
Starting IP Address The first address in the IP address pool. Any DHCP
client joining the LAN is assigned an IP address in
this range.
Maximum Number of
DHCP Users
The maximum number of DHCP clients.
IP Address Range (Read-only) The range of IP addresses available to
the DHCP clients.
Client Lease time Duration (in hours) that IP addresses are leased to
clients.
Static DNS 1 IP address of the primary DNS server.
Static DNS 2 IP address of the secondary DNS server.
Static DNS 3 IP address of the tertiary DNS server.
WINS IP address of the primary WINS server.