• Number of Associated Clients – The number of associated clients on wireless.
• RX Packets – Number of RX packets.
• RX Bytes – Number of RX bytes.
• TX Packets – Number of TX packets.
• TX Bytes – Number of TX bytes.
• Multicast Packets – Number of multicast packets.
• Packet Error – Number of packet errors.
• Packet Dropped – Number of packets dropped.
• Collisions – Number of collisions.
Click the Refresh button to refresh the data or click Reset to reset the counters.
Port Status
• Port ID – Defined name and number of the port.
• Link Status – Status of the interface.
• Port Activity – Status of the port (example: port enabled or disabled or connected).
• Speed Status – The speed (in Mbps) of the device after auto negotiation.
• Duplex Status – Duplex mode: Half or Full.
• Auto Negotiation – Status of the auto negotiation parameter. When (On), it detects the duplex mode. If
the connection requires a crossover, it automatically chooses the MDI or MDIX configuration that matches
the other end of the link.
WAN QoS Statistics
The WAN QoS Statics page displays the statistics of the outbound and inbound WAN QoS. To view the
device’s WAN QoS Statics page, click Status and Statistics > WAN QoS Statistics.
• Interface – Select the name of the interface from the drop-down list.
• Policy Name – Name of the policy.
• Description – Description of the WAN QoS statistics.
• Clear Counters – Click to clear the counters.
Outbound QoS Statistics
• Queue – Number of outbound queues.
• Traffic Class – Name of traffic class assigned to queue.
• Packets Sent – Number of outbound packets of the traffic class sent.
RV260x Administration Guide
15
Status and Statistics
WAN QoS Statistics
To Next Page
Loading...
Need help?
General
