DMZ Host
DMZ is a subnetwork that is open to the public but behind the firewall. With DMZ, the packets, which are
coming into the WAN port, can be redirected to a specific IP address in the LAN.
DMZ Host allows one host on the LAN to be exposed to the Internet to use services such as Internet gaming,
video conferencing, web, or email servers. Access to the DMZ Host from the Internet can be restricted by
using firewall access rules. Please be careful when you enable DMZ host because all the services of this host
will be exposed to the Internet.
To configure the DMZ Host, follow these steps:
Step 1 Choose Firewall > DMZ Host.
Step 2 In DMZ Host, check Enable.
Step 3 Enter the DMZ Host IP Address.
Step 4 Click Apply.
RV260x Administration Guide
87
Firewall
DMZ Host
To Next Page
Loading...
Need help?
General
