Cisco SE-CL-L3 User Manual

Figure 48: Hardware RAID Card Cable-to-Drive Backplane Mapping, LFF 4-Drive Version
Figure 49: Hardware RAID Card Cable-to-Drive Backplane Mapping, SFF 10-Drive Version
Embedded SATA RAID Controller
This server includes an embedded MegaRAID controller that supports RAID levels 0 and 1. The primary
controller can control up to eight front-loading SATA-only drives. The secondary controller can control two
internal M.2 SATA drives.
The VMware ESX/ESXi operating system is not supported with the embedded SATA MegaRAID controller
in SW RAID mode. You can use VMWare in AHCI mode.
Note
The Microsoft Windows Server 2016 Hyper-V hypervisor is supported for use with the embedded MegaRAID
controller in SW RAID mode, but all other hyperviors are not supported. All Hypervisors are supported in
AHCI mode.
Note
Cisco Application Services Engine Hardware Installation Guide
96
Storage Controller Considerations
Embedded SATA RAID Controller

Cisco SE-CL-L3 Specifications

General

Brand	Cisco
Model	SE-CL-L3
Category	Server
Language	English