Cisco SE-CL-L3 User Manual

CHAPTER 1
Overview
• Overview, on page 1
• External Features, on page 1
• Serviceable Component Locations, on page 4
• Summary of Server Features, on page 6
Overview
Cisco Application Services Engine provides a common platform for deploying Cisco Data Center applications.
These applications provide real time analytics, visibility and assurance for policy and infrastructure.
The Cisco Application Services Engine server is required for installing and hosting the Cisco Application
Services Engine application.
The server is orderable in the following version:
• SE-CL-L3 — Small form-factor (SFF) drives, with 10-drive backplane. Supports up to 10 2.5-inch
SAS/SATA drives. Drive bays 1 and 2 support NVMe SSDs.
The Cisco Application Services Engine software is pre-installed on the server. It is detected after the server
is connected, installed and powered on. Cisco Application Services Engine app allows you to fully enable the
capabilities of the Cisco Application Services Engine.
Cisco Application Services Engine app can be downloaded from the Cisco DC App Center. See the Cisco
Application Services Engine for more information on downloading and using the app.
Note
External Features
This topic shows the external features of the server versions.
Cisco SE-CL-L3 (SFF Drives) Front Panel Features
The following figure shows the front panel features of the small form-factor drive versions of the server.
For definitions of LED states, see Front-Panel LEDs, on page 21.
Cisco Application Services Engine Hardware Installation Guide
1

Cisco SE-CL-L3 Specifications

General

Brand	Cisco
Model	SE-CL-L3
Category	Server
Language	English