Cisco SE-CL-L3 User Manual

Figure 2: SE-CL-L3 (LFF Drives) Front Panel
Temperature status LED7Drive bays 1 – 4 support SAS/SATA HDDs and
SSDs
1
Power supply status LED8Drive bays 1 and 2 support NVMe PCIe SSDs.
A size-converter drive sled is required if 2.5-inch
SSDs are used.
2
Network link activity LED9Power button/power status LED3
KVM connector
(used with KVM cable that provides one DB-15
VGA, one DB-9 serial, and two USB connectors)
10Unit identification button/LED4
Pull-out asset tag11System health LED5
-Fan status LED6
SE-CL-L3 Rear Panel Features
The rear panel features are the same for all versions of the server.
For definitions of LED states, see Rear-Panel LEDs, on page 24.
Cisco Application Services Engine Hardware Installation Guide
3
Overview
External Features

Cisco SE-CL-L3 Specifications

General

Brand	Cisco
Model	SE-CL-L3
Category	Server
Language	English